The Story
The Stryfe Performance Mod Kit includes all the parts needed to modify your Stryfe.
*LiPo BATTERIES CAN BE DANGEROUS!
OUT OF DARTS DOES NOT TAKE ANY RESPONSIBILITY FOR BATTERY HANDLING OR MISUSE. READ THIS ENTIRE PAGE ON LiPo SAFETY BEFORE PURCHASING
Battery, charger, and LiPo alarm are strongly recommended. We have a LiPo Safety Guide linked below that we strongly suggest you read. Compatible LiPo batteries and a charger will also be linked down below. LiPo Batteries can only be shipped by ground to the continental USA. All packages containing LiPo Batteries have longer delivery times. For more information, visit our FAQ page.
Switch mounting plate offers a convenient way to mount your rev switch inside the blaster. Glue this in place and you're good to go!
Please note: This kit does not include the Stryfe Battery Cover, but there is a link below if you want to add one to your order.
FEATURES:
• Easily mount rev trigger with custom switch plate
• Glue in place
• Minimal interior shell trimming required
• Add a LiPo, alarm, and charger, and you're good to go!
FPS RATINGS / STANDARD DEVIATION / DART TYPE
• 39mm - 162 / 5 / AF Pro Short
• 39mm - 180 / 6 / AF Pro Full Length
• 40mm - 155 / 3.8 / AF Pro Short
• 40mm - 177 / 4.7 / AF Pro Full Length
• 41mm - 143 / 2 / AF Pro Short
• 41mm - 182 / 3 / AF Pro Full Length
• 42mm - 111 / 4.9 / AF Pro Short
• 42mm - 155 / 8.1 / AF Pro Full Length
INCLUDES:
• 2x - Fang ReVAMPed 130 2s Neo Motors
• 1x - Daybreak Flywheels
• 1x - 3D Daybreak Cage
• 1x - 21A Genuine Omron Microswitch
• 1x - Stryfe Switch Mounting Plate
• 1x - 16AWG Red/Black silicone hobby wire
• 1x - XT30 Connector
• 1x - Precut small heat shrink
• 2x - Precut large heat shrink
• 2x - 3D Printed Motor Cage Spacers
• 4x - Flywheel cage screws
REQUIRED ADD-ONS:
• Tattu R-Line 550mAh 2S 95C LiPo (XT30)
• Gens Ace Imars III Charger
• XT-30 Charging Adapter
• LiPo Alarm
• Stryfe Battery Cover
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
The Stryfe Performance Mod Kit includes all the parts needed to modify your Stryfe.
*LiPo BATTERIES CAN BE DANGEROUS!
OUT OF DARTS DOES NOT TAKE ANY RESPONSIBILITY FOR BATTERY HANDLING OR MISUSE. READ THIS ENTIRE PAGE ON LiPo SAFETY BEFORE PURCHASING
Battery, charger, and LiPo alarm are strongly recommended. We have a LiPo Safety Guide linked below that we strongly suggest you read. Compatible LiPo batteries and a charger will also be linked down below. LiPo Batteries can only be shipped by ground to the continental USA. All packages containing LiPo Batteries have longer delivery times. For more information, visit our FAQ page.
Switch mounting plate offers a convenient way to mount your rev switch inside the blaster. Glue this in place and you're good to go!
Please note: This kit does not include the Stryfe Battery Cover, but there is a link below if you want to add one to your order.
FEATURES:
• Easily mount rev trigger with custom switch plate
• Glue in place
• Minimal interior shell trimming required
• Add a LiPo, alarm, and charger, and you're good to go!
FPS RATINGS / STANDARD DEVIATION / DART TYPE
• 39mm - 162 / 5 / AF Pro Short
• 39mm - 180 / 6 / AF Pro Full Length
• 40mm - 155 / 3.8 / AF Pro Short
• 40mm - 177 / 4.7 / AF Pro Full Length
• 41mm - 143 / 2 / AF Pro Short
• 41mm - 182 / 3 / AF Pro Full Length
• 42mm - 111 / 4.9 / AF Pro Short
• 42mm - 155 / 8.1 / AF Pro Full Length
INCLUDES:
• 2x - Fang ReVAMPed 130 2s Neo Motors
• 1x - Daybreak Flywheels
• 1x - 3D Daybreak Cage
• 1x - 21A Genuine Omron Microswitch
• 1x - Stryfe Switch Mounting Plate
• 1x - 16AWG Red/Black silicone hobby wire
• 1x - XT30 Connector
• 1x - Precut small heat shrink
• 2x - Precut large heat shrink
• 2x - 3D Printed Motor Cage Spacers
• 4x - Flywheel cage screws
REQUIRED ADD-ONS:
• Tattu R-Line 550mAh 2S 95C LiPo (XT30)
• Gens Ace Imars III Charger
• XT-30 Charging Adapter
• LiPo Alarm
• Stryfe Battery Cover
